Logo Nedis

Wildlife Camera | 12 Mpixel | 55° Beeldhoek | Bewegingscamera 25.0 m

  • Artikelnummer: WCAM22GN
  • Artikelcode fabrikant: WCAM22GN
  • EAN-nummer: 5412810274321

Consument?

Vind de dichtstbijzijnde winkel of webshop .

Waar te koop

Zakelijke klant?

Registreer voor exclusieve toegang tot ons volledige assortiment en prijzen .

Registreer in een paar minuten

Beschrijving

Productomschrijving

Bevestig deze wildlife camera aan een boom en leg van dichtbij videobeelden vast van dieren in het wild. De camera is voorzien van nachtzicht en een uitstekende triggertijd, er zijn dus geen excuses meer om een opname te missen.

Eigenschappen

• 12 MP-resolutie voor beelden van hoge kwaliteit
• Videoresolutie van 1280x720
• Geïntegreerd LCD-display + knoppen voor groot gebruiksgemak
• Neemt videobeelden en geluid op

Inhoud verpakking

1x digitale camera
1x USB-kabel
1x bevestigingsband
handleiding
WCAM22GN

Specificaties

Productspecificaties
Type Vrijstaand
Kenmerk Extreem Laag Energieverbruik
Kleur Bladeren
Videoresolutie 1280x720
Vormgeving camera Miniatuur
Interface USB
SD
Type opslag SD
IP-classificatie IP44
Bedrijfstemperatuur -20 - 60 °C
Beeld-chip 1/2.5" CMOS
Detectiebereik 25.0 m
Detectiehoek 55 °
Ingangsspanning 6 VDC
Kijkhoek 52 °
Megapixels 12.0 MPixel
Nachtzicht 10.0 m
Schermgrootte 1.4"
Type batterij 4x AA/LR6
8x AA/LR6

Verpakking

Verpakkingsafmetingen (Giftbox)
Breedte Hoogte Lengte
110 mm 168 mm 84 mm
Logistieke afmetingen
Verpakt per Breedte Hoogte Lengte Gewicht
1 110 mm 168 mm 84 mm 440 g
20 565 mm 345 mm 205 mm 9700 g

Ondersteuning

Belangrijke links

Veelgestelde vragen

Wij hebben voor u de volgende vragen gevonden in het Engels

How do I access and use the menu?

Set the switch to setup
press menu.
Use up and down to scroll through the main menu.
Press ok to enter a certain menu.
Use left and right to change the value of the particular option.

What does Camera Position mean?

This option allows you to give a camera aunique name so you can keep multiple camera's apart.

How Do I use the menu?

- Set the switch to setup (middle position)
- Press menu
- Use up and down to go to camera mode
- use left and right to change it to video if needed.
- Press down to set the clock. press enter to go into the date and time menu.
- Exit this menu and go to video size and select the resolution you want (1280x720 is the highest resolution)
- The next option is the video length. How long do you want it to record after a detection.
- Timelapse is an option that will have the camera take picture every 5 minutes (or 10, 15, 20 etc) and then stitches it into a video.
- PIR trigger: here you can set the sensitivity of the motion detection.
- PIR interval sets how often you want to scan with motion detection.
- Camera position is only a tag you can give your camera if you have more than one camera (camera 1 , camera 2 etc)

Difference between photo sizes

Difference between photo sizes: the resolution of the photo or video

What is photo burst?

Taking multiple photo's in rapid succession

When use video size 640x480 or 1280x720

Lower resolution means lower quality but you can store more video on your memory card, We recommend 1280x720 for best results

What means PIR and how to use it

PIR is the motion detection. Turn it on to make the camera record when it sees motion

how to use the mode button

mode is photo or video (do you want it to record a photo, video or both?)

when use the record button

This is for manual recording. typically this is not used.

how to use the on/off switch

to turn the camera on and off

which video length should i use and why

that's up to you. there is no right or wrong.

why and how use the timelapse

timelapse is a mode that takes pictures at certain intervals. Afterwards you can play this as a video. it looks like it is fast forwarded.

consequence of PIR trigger high, normal or low

high is sensitive: it will respond to smaller movements.

explanation of PIR interval

how often do you want it to scan for movement.

what is Camera Posit

It's the name of the camera, it is easier to keep multiple camera's apart.

With gentle shaking the camera, a black plastic ring pushes against the lens. Is that normal?

Sometimes the IR filter is in front of the lens, when the camera is turned off. The camera is not faulty. When the camera is on, it will fix itself to the right place in front of the lens.


U heeft 0 van de 0 producten om te vergelijken geselecteerd. (Selecteer nog een product)

Vergelijk
Terug naar top